Toshiba DK16 Network Card User Manual


 
PROGRAMMINGPROCEDURES-INTRODUCTION
SECTION lOO-816-301
MARCH1993
TABLE 1 -B (continued)
MULTIDIMENSIONAL PROGRAM: PROGRAM 30,
STATION CLASS OF SERVICE
Press...
Step
BUTTONS + LED keys
#
Action description
LCD RESPONSE . . .
6.
LED keys 01 - 20 (continued)
LEDs 12 and 13 ON: Digital Telephone Handset
Receiver Volume
LED 14 ON: Account Codes Verified
LED 15 ON:
Verified Account Code Revision Authority
LED 16 ON: Traveling Class of Service Code Revision
Authority
LED 17 ON:
Do Not Disturb Override Allowed
LED 18 ON: Executive Override Allowed
LED 19 ON:
Privacy Override Allowed
LED 20 ON: Not Used
If programming a port range, the LED indications are
as follows:
l
LED-ON, all ports in range are enabled for that item.
l
LED-OFF, all ports in range are disabled for that item.
l
LED-FLASHING, some ports in range are enabled and
some ports are disabled.
7. HOLD
30 SELECT = (00 - 19)
Secure data in system programming.
DATA PROGRAMMED
8. SPKR
30 SELECT =
Prepare system for another selection (go back to
step 5), or exit Program 30 (continue with step 9).
9. # # HOLD
30 SELECT = ##
Secure Program 30 data in system memory.
DATA PROGRAMMED
IO.
SPKR
PROGRAM =
Exit Program 30. Enter another program number or exit
programming mode (go to step 11).
System beeps to indicate it is exiting Program 30.
11.
# # HOLD
NO. OF STATION (10 - 29)
Exit programming mode.
JAN 20 SUN
06:58
1-5