Filter
Top Products
3. Press the Spkr button.
[::::l::lt::M:O]
To Clear Name/Number Display:
Press the Intercom button, dial
6 2 0 and press the Spkr button
During clear:
[UEIl]
After clear:
[011]
To Enter Name/Number
Information for Other
StationdDevices:
1. Turn off Soft Keys by pressing
Mode 7 0, when telephone
is idle.
2. Press the Intercom button
and dial 6 2 1.
IU81R
3. Press the Page button.
The new information is stored and will appear on the top line of the
display. For example, if you entered “TOSHIBA EXT. 10:’ that will appear
above the date/day/time on the display.
You will hear a confirmation tone, then a busy tone.
NOTES:
1. Your title will appear on the LCD during direct intercom, forwarded,
and hunted ca//s. On override or OCA calls, the LCD will not displey
the title.
2. After a name is c/eared, it may be redisplayed at any time by dialing
Intercom 6 2 1.
3. A name is displaced by message and call forward settings if they
are set.
4. To erase NAME/NUMBER information from memory, repeat Steps
1 - 3 above and enter blanks in Step 2. Blanks are entered by
pressing 1 in the alpha mode.
Entering Name/Number information for other stations or devices is only
allowed from one station, usually station 10.
“USER NAME?” will appear on the upper line of the LCD.
Current information will appear on the lower line of the LCD.
The LCD displays “DEST. EKT NO.?” In this case, EKT stands for the
intercom number of the digital, electronic or standard telephone.
Dial the intercom number
(N N) of the station for which
the NAME/NUMBER
information is to be recorded.
I
1
DES1 EKT NO.NN
Press the Page button
“USER NAME?” will appear on the upper line of the LCD, and current
information for station NN will appear on the lower line of the LCD.
Enter the new information via
the dialpad (refer to
Recording a Message for
method).
Press the Spkr button.
Repeat steps 2 - 7 to enter
more names/numbers.
To turn Soft Keys on, press
Mode 7 1 when your
telephone is idle.
Up to 16 characters can be recorded. It is recommended that you enter
the station number along with the user’s name.
The new information is stored and appears on the top line of station NN’s
LCD. Station IO’s LCD returns to the normal idle display.
NOTES:
1. To erase the NAME/NUMBER information of another station, repeat
Steps 1 - 6 above and enter blanks in Step 5. Blanks are entered
by pressing 1 in the alpha mode.
2. Station NN may set and clear the NAME/NUMBER feature anytime:
g Set: Intercom 6 2 1.
n
Clear: ldorcom 6 2 0. “C/ear” eliminates the display when
calling, but does not erase
it
from memory
SPEED DIAL MEMO
This feature allows an LCD user to program a 12-character name for
each of his/her 40 personal speed dial numbers. The memo pad of
names may be stepped through to select the appropriate party. Memos
may also be added to the 40 system speed dial codes via station number
~ (usually 10).
4-6 4-7