Filter
Top Products
135
Relay Transmission to a Remote Hub - continued
Enter the password to access
the Relay Box.
Then press:
Enter the facsimile number of
the remote hub unit using any
of the following dialing meth-
ods.
• One Touch Key Dialing
... See page 97
• Abbreviated Dialing
... See page 98
• Alphabet Dialing
... See page 99
• Keypad Dialing
... See page 100
The facsimile starts scanning
the document into memory.
The following screen is dis-
played for about 2 seconds be-
fore returning to the Standby
Mode.
Enter the Password
for Reservation
6
Dial the Remote Hub
Unit
7
Complete the
Procedure
8
SCANNING INTO MEMORY
FILE NBR= 231
RESIDUAL MEMORY 90%
TEL NUMBER=(MAX128)
123
If the remote hub unit has a
password programmed, press:
Go to Step 6.
If the remote hub unit does not
have a password programmed,
press:
Go to Step 7.
Enter the Box
Number
5
SEND(RELAY)
ENTER TEL NUMBER.
SPEED DIL KEY OR
ONE TOUCH KEY