Filter
Top Products
63
ECM (Error Correction Mode) is
an internationally-recognized er-
ror correction system. It enables
error free communications by
automatically re-sending any
portion of the document affected
by phone line noise or distor-
tion.
NOTES:
• Default ECM setting is
ON.
• Both the sender and the
receiver must have the
ECM feature to perform
ECM communications.
• This setting cannot be
changed if a document is
stored in memory. Re-
sidual memory must be
100%.
• ECM is required for Su-
per G3 (33,600 bps) op-
erations. If ECM is dis-
abled, Super G3 opera-
tions are, also, disabled.
Press:
+
+
+
+
Display the SET
ECM Menu
1
SET ECM
1.ON
2.OFF
ECM Default Setting
Select the desired ECM option.
The LCD screen shown below is
displayed for 2 seconds.
To turn ECM to ON, press:
To turn ECM to OFF, press:
Select the ECM
Option
2
OPERATION COMPLETED
After completing this Configura-
tion Setting, you may continue
to select other settings referring
to their associated pages for in-
structions, or press
to exit the Configuration Setting
mode and return to the Standby
Mode.
Select Another
SETUP Item, or ...
3
Displayed for 2 seconds
Returns to display the SETUP
menu screen.