Filter
Top Products
32
Remove the Ozone Filter from
the inside of the machine.
Then, place the new Ozone Fil-
ter into the machine.
Drum Unit Replacement - continued
Attach the new Drum Unit to the
Developer Assembly. Position
the new Drum Unit with the
green drum surface facing the
black toner roller on the Devel-
oper Assembly.
Holding the Developer Assem-
bly by the green handles, align
the three shafts on the Devel-
oper Assembly sides with the
slots in the machine frame.
Press firmly down on the green
squares on the Drum Unit until
the Drum Unit clicks into place.
Press Down on the
Drum Unit
6
Replace the Ozone
Filter
7
Attach the new Drum
Unit to the
Developer Assembly
4
Install the Developer
Assembly with Drum
Unit
5
Drum Unit
Ozone Filter
Drum Unit
Developer
Assembly
Replacing the Ozone Filter
The Ozone Filter should be re-
placed every time the Drum Unit
is replaced.
A new Ozone Filter has been
provided with the Drum Kit.
Make sure the Ozone Filter is
replaced.
042 043 044
069
Developer
Assembly