Filter
Top Products
87
The following table shows the specifications for original documents that can be used
with the facsimile.
Caution:
If the documents are any of the following, they should be copied to plain paper
before transmitting.
• Torn, wrinkled, or damp pages
• Folded pages or pages with holes
• Transparent pages or pages with a smooth, shiny finish
• Cloth or metal sheets
When using originals with the following specifications, use a carrier sheet to avoid
document jams or misfeeds. When using carrier sheets, only one sheet can be
sent at a time.
• Smaller than minimum size.
• With thickness less than 0.05 mm.
To use a carrier sheet, lift the clear cover, place a single document sheet face-up
on the paper sheet. Purchase carrier sheets from your TOSHIBA facsimile dealer
or use a transparency with a paper backing attached at the lead edge.
Document Specifications
NOTES:
• Operator assistance may be required for pages longer than 420mm (16.5
inches).
• For multiple sheets, the documents must be the same size and paper type.
• A small border region of each document is not imaged when each document is
scanned. The effective scanning area is as shown in the figure below.
Max.
Single Sheet Multiple Sheets
Document
Size
0.05 to 0.15 mm
[0.002 to 0.0059 in.]
0.06 to 0.12 mm
[0.0025 to 0.0047 in.]
Thickness of
Document
Uncoated on both sidesType of Paper
Min.
216mm(W) x 1000mm(L)
[8.5 in.(W) x 39.37 in.(L)]
148mm(W) x 100mm(L)
[5.83 in.(W) x 3.94 in.(L)]
Effective Scanning
Width
214mm
[8.4 in.]
Max. Capacity of
Document Tray
Up to 20 sheets (Legal Size)
Up to 50 sheets (Letter Size)
- TRANSMIT CONFIGURATION
Effective
Scanning
Area
216 mm (8.5 inches)
Letter/Legal Size
214 mm (8.4 inches)
Max. 4 mm (0.16 inches)
Max. 2.5 mm (0.1 inches)