Filter
Top Products
202
Press:
+
+
+
+
+
+
Relay Station Transmission Report Setting
SET RELAY STN. REPT.
1.ALWAYS
2.ON ERROR
3.OFF
Select the option to print a re-
port when the DP120F/DP125F
is used as a relay hub station.
This report is printed by the hub
unit after a relay transmission to
end terminals.
To ALWAYS print a report,
press:
To only print a report when an
error has occurred, press:
To turn OFF automatic printing
of reports, press:
Go to Step 12.
To print a first page image of the
document, press:
To not print a first page image of
the document, press:
The following screen is dis-
played to confirm your selection.
PRINT 1ST PG IMAGE?
1.ON
2.OFF
Display the RELAY
STN. REPORT Menu
1
Set the Option for
Relay Hub Station
2
Set the Option for
First Page Image
3
OPERATION COMPLETED
After completing the Relay Sta-
tion Transmission Report Set-
ting, you may continue to select
other Report settings referring to
their associated pages for in-
struction, or press
to exit the Report Setting mode
and return to the Standby Mode.