Filter
Top Products
189
This option allows you to select
the phone line to be used for a
transmission if this facsimile is
equipped with the 2nd Line
Board.
You can activate this option
when programming an Abbrevi-
ated Dial Number (see page 70)
or One Touch Dial Key (see
page 77) if the communication
with a certain remote party al-
ways requires this option.
NOTE:
Line 2 is available for trans-
mission if Line 2 has been
set for Transmission/Recep-
tion (see page 69). In addi-
tion, if Line 2 is set for recep-
tion only with timer, trans-
missions are only possible
when the timer has expired.
Turn the Flip Panel to the “50-
73” view to select the desired
Function Key.
Press:
NOTE:
If no Line 2 Board is in-
stalled, an error prompt will
result from this application.
Load the document face down
in the Document Tray (see page
88).
Adjust the resolution and con-
trast if desired (see page 89).
Select the desired option.
To not select a specific line,
press:
To select Line 1, press:
To select Line 2, press:
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option at
this point.
• One Touch Key Dialing
... See page 97
• Alphabet Dialing
... See page 98
• Abbreviated Dialing
... See page 99
• Keypad Dialing
... See page 100
Line Selection
Load the Document
1
Display the TEL
LINE SELECT Menu
2
Select the Desired
Option
3
Enter the Facsimile
Number
4
TEL LINE SELECT
1.FIRST AVAILABLE
2.LINE #1
3.LINE #2
COMM. RESERVATION
RESIDUAL MEMORY 80%
ENTER TEL NUMBER
APR-15-00 SAT11:13
RESIDUAL MEMORY 100%
ENTER TEL NUMBER