Filter
Top Products
266
Click Next.
Installing the TOSHIBA Viewer - continued
Device Setup - continued
6
Select the Port that your DP120F/
DP125F is connected to
If there is a TOSHIBA Viewer TWAIN resource avail-
able for the DP120F/DP125F you are using, TOSHIBA
Viewer will ask if the TWAIN resource should be in-
stalled as you configure the device.
Click Next.
7
Select Yes, install TWAIN components
8
Select Yes, create a printer
If the DP120F/DP125F prints using a TOSHIBA
Viewer driver, TOSHIBA Viewer will ask if a printer
driver for the DP120F/DP125F should be created or
not. If you choose to create this printer, it will be
named after the DP120F/DP125F but you can edit this
name if you prefer.
Click Next.
NOTE:
If you choose not to create the “print” printer driver
during the definition of the device or it is deleted, you
can create the “print” printer driver for the DP120F/
DP125F later. To do this, open the Devices folder,
right click on the appropriate device and select Cre-
ate printer. For further details, see the Help for
Create printer.