Chapter 10 Monitor
ISG50 User’s Guide
201
You use the Traffic Statistics screen to tell the ISG50 when to start and when to stop collecting
information for these reports. You cannot schedule data collection; you have to start and stop it
manually in the Traffic Statistics screen.
Figure 145 Monitor > System Status > Traffic Statistics
There is a limit on the number of records shown in the report. Please see Table 37 on page 203 for
more information. The following table describes the labels in this screen.
Table 36 Monitor > System Status > Traffic Statistics
LABEL DESCRIPTION
Data Collection
Collect Statistics Select this to have the ISG50 collect data for the report. If the ISG50 has already been
collecting data, the collection period displays to the right. The progress is not tracked here
real-time, but you can click the Refresh button to update it.
Apply Click Apply to save your changes back to the ISG50.
Reset Click Reset to return the screen to its last-saved settings.
Statistics
Interface Select the interface from which to collect information. You can collect information from
Ethernet, VLAN, bridge and PPPoE/PPTP interfaces.