Chapter 18 NAT
ISG50 User’s Guide
325
18.2.1 The NAT Add/Edit Screen
The NAT Add/Edit screen lets you create new NAT rules and edit existing ones. To open this
window, open the NAT summary screen. (See Section 18.2 on page 324.) Then, click on an Add
icon or Edit icon to open the following screen.
Figure 214 Configuration > Network > NAT > Add
The following table describes the labels in this screen.
Mapped Port This field displays the new destination port(s) for the packet. This field is blank if
there is no restriction on the original destination port.
Apply Click this button to save your changes to the ISG50.
Reset Click this button to return the screen to its last-saved settings.
Table 102 Configuration > Network > NAT (continued)
LABEL DESCRIPTION
Table 103 Configuration > Network > NAT > Add
LABEL DESCRIPTION
Create new
Object
Use to configure any new settings objects that you need to use in this screen.
Enable Rule Use this option to turn the NAT rule on or off.
Rule Name Type in the name of the NAT rule. The name is used to refer to the NAT rule. You
may use 1-31 alphanumeric characters, underscores(
_), or dashes (-), but the
first character cannot be a number. This value is case-sensitive.