Chapter 26 ADP
ISG50 User’s Guide
418
26.3.5 Protocol Anomaly Profiles
Protocol anomaly is the third screen in an ADP profile. Protocol anomaly (PA) rules check for
protocol compliance against the relevant RFC (Request for Comments).
Protocol anomaly detection includes HTTP Inspection, TCP Decoder, UDP Decoder, and ICMP
Decoder where each category reflects the packet type inspected.
Protocol anomaly rules may be updated when you upload new firmware.
26.3.6 Protocol Anomaly Configuration
In the Configuration > Anti-X > ADP > Profile screen, click the Edit icon or click the Add icon
and choose a base profile, then select the Protocol Anomaly tab. If you made changes to other
screens belonging to this profile, make sure you have clicked OK or Save to save the changes
before selecting the Protocol Anomaly tab.
Cancel Click Cancel to return to the profile summary page without saving any changes.
Save Click Save to save the configuration to the ISG50 but remain in the same page.
You may then go to the another profile screen (tab) in order to complete the
profile. Click OK in the final profile screen to complete the profile.
Table 138 Configuration > ADP > Profile > Traffic Anomaly (continued)
LABEL DESCRIPTION