Chapter 16 Zones
ISG50 User’s Guide
316
The following table describes the labels in this screen.
Table 98 Network > Zone > Edit
LABEL DESCRIPTION
Name For a system default zone, the name is read only.
For a user-configured zone, type the name used to refer to the zone. You may use
1-31 alphanumeric characters, underscores(
_), or dashes (-), but the first
character cannot be a number. This value is case-sensitive.
Block Intra-zone
Traffic
Select this check box to block network traffic between members in the zone.
Member List Available lists the interfaces and VPN tunnels that do not belong to any zone.
Select the interfaces and VPN tunnels that you want to add to the zone you are
editing, and click the right arrow button to add them.
Member lists the interfaces and VPN tunnels that belong to the zone. Select any
interfaces that you want to remove from the zone, and click the left arrow button
to remove them.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.