ZyXEL Communications ISG50 Network Router User Manual


 
Chapter 27 Global PBX Settings
ISG50 User’s Guide
443
27.8.1 Setting Up the TAPI Driver and Utility on Your Computer
Your computer needs to be running Windows XP, Windows Vista, Windows 7 or Windows Server
200x.
Note: If your computer is on the ISG50's WAN and you want to have a TAPI connection to
the ISG50, make sure a firewall rule for the CTI port service object is configured to
allow incoming TCP port 5038 traffic.
Note: If you need to install the TAPI driver on a computer that is running a 64-bit
operating system, and see a message "This application has failed to start because
its side-by-side configuration is incorrect.”, download and install the "Microsoft
Visual C++ 2005 SP1 Redistributable Package (x64)" from the Microsoft website.
To download and install the driver:
Server1/2
Password
Specify the password for the TAPI server account.
You can use up to 63 printable ASCII characters.
Server TAPI Lines
Settings
Peer Pool lists all the extension numbers that you created in the Authority Group >
Add screen (see Section 29.3.1 on page 462). Select the extensions that you want a TAPI
server to manage via a TAPI connection, and click the right arrow button to add them.
Server TAPI Lines lists the extensions a TAPI server can manage. Select any extensions
that you don’t want the TAPI server to manage and monitor, and click the left arrow
button to exclude them.
Client TAPI Lines
Settings
Peer Pool lists all the extension numbers that you created in the Authority Group >
Add screen. Select the extensions that you want a TAPI client to manage via a TAPI
connection, and click the right arrow button to add them.
Client TAPI Lines lists the extensions that can be managed by TAPI clients. Select any
extensions that you don’t want the TAPI client to manage and monitor, and click the left
arrow button to exclude them.
License Status
This field displays whether the TAPI service is activated (Licensed) or not (Not
Licensed) or expired (Expired).
License Type
This field displays whether you applied for a trial application (Trial) or registered the
service with your iCard’s PIN number (Standard). This field shows None when the
service is not activated.
Apply New
Registration
Click this button to open the Registration screen where you can register the device and
activate or extend a service.
TAPI Driver
Download
Click the Download button to get the ZyXEL TAPI driver from the ZyXEL FTP site. Make
sure your ISG50 has Internet access.
Note: Before or after you install the TAPI driver and utility in your computer, you need to
activate the TAPI service and create a server account or extension on the ISG50 in
order to communicate with the ISG50 using TAPI connections.
Apply Click this to save your changes.
Reset Click this to set every field in this screen to its last-saved value.
Table 148 Configuration > PBX > Global > TAPI (continued)
LABEL DESCRIPTION