Filter
Top Products
Chapter 35 Call Recording
ISG50 User’s Guide
546
The following table describes the labels in this screen.
Table 199 Configuration > PBX > Call Recording
LABEL DESCRIPTION
Quota Usage This bar displays what percentage of the ISG50’s call recording storage space is currently
in use. When the storage space is almost full, you should consider deleting call recording
files before adding more.
Call Recording
Quota
Set the maximum number of minutes of call recording on the ISG50.
Enable Call
Recording
Prompt
Select this to have the ISG50 play a recording notification message at the beginning of
calls that it records.
Call Recording
Beep Frequency
The ISG50 plays a beep at a regular interval to remind the call participants about the
recording. Set the interval here. 0 means there is no beep.
Enable On-
demand
Recording
Select this to allow any user of an internal extension to dial a number to have the ISG50
record his current call on whichever extension he is using. See Section 27.3 on page 433
to set the number a user dials to enable on-demand call recording.
Full-time
Recording Peer
Settings
Use this list boxes to select the trunks the ISG50 records all the time.
Trunk Use this section to specify for which trunks the ISG50 should record all outgoing and
incoming calls. Select a trunk in the Trunk Pool column and click the right arrow to select
it for recording.
Select a trunk in the Recorded Trunk column and click the left arrow to not record this
trunk’s calls.
Peer Use this section to specify for which extensions the ISG50 should record all outgoing and
incoming calls. Select an extension in the Peer Pool column and click the right arrow to
select it for recording.
Select an extension in the Recorded Peer column and click the left arrow to not record
this extension’s calls.
Apply
Click this to save your changes.
Reset Click this to set every field in this screen to its last-saved value.