Filter
Top Products
Appendix A Log Descriptions
ISG50 User’s Guide
797
[SA] : Tunnel [%s]
Phase 2 SA protocol
mismatch
%s is the tunnel name. When negotiating Phase-2, the SA protocol
did not match.
[SA] : Tunnel [%s] SA
sequence size mismatch
%s is the tunnel name. When negotiating Phase-2, the SA sequence
size did not match.
[XCHG] exchange type
is not IP, AGGR, or
INFO
This device is the responder and this is the initiator’s first packet, but
exchange type is not IP, AGGR, or INFO and the packet is ignored.
Cannot resolve My IP
Addr %s for Tunnel
[%s]
1st %s is my ip address. 2nd %s is the tunnel name. When selecting
a matched proposal in phase-1, the engine could not get My-IP
address.
Cannot resolve Secure
Gateway Addr %s for
Tunnel [%s]
1st %s is my ip address. 2nd %s is the tunnel name; When selecting
a matched proposal in phase-1, the engine could not get the correct
secure gateway address.
Could not dial dynamic
tunnel "%s"
%s is the tunnel name. The tunnel is a dynamic tunnel and the device
cannot dial it.
Could not dial
incomplete tunnel "%s"
%s is the tunnel name. The tunnel setting is not complete.
Could not dial manual
key tunnel "%s"
%s is the tunnel name. The manual key tunnel cannot be dialed.
DPD response with
invalid ID
When receiving a DPD response with invalid ID ignored.
DPD response with no
active request
When receiving a DPD response with no active query.
IKE Packet Retransmit
When retransmitting the IKE packets.
Phase 1 IKE SA process
done
When Phase 1 negotiation is complete.
Recv Main Mode request
from [%s]
%s is the remote name; When receiving a request to enter Main
mode.
Recv Aggressive Mode
request from [%s]
%s is the remote name; When receiving a request to enter
Aggressive mode.
Recv:[SA][KE][ID][CER
T][CR][HASH][SIG][NON
CE][DEL][VID][ATTR][N
OTFY:%s]
This is a combined message for incoming IKE packets
Send Main Mode request
to [%s]
%s is the remote name. The device sent a request to enter Main
Mode.
Send Aggressive Mode
request to [%s]
%s is the remote name. The device sent a request to enter
Aggressive Mode.
Send:[SA][KE][ID][CER
T][CR][HASH][SIG][NON
CE][DEL][VID][ATTR][N
OTFY:%s]
This is a combined message for outgoing IKE packets.
Start Phase 2: Quick
Mode
Indicates the beginning of phase 2 using quick mode.
Table 320 IKE Logs (continued)
LOG MESSAGE DESCRIPTION