Chapter 55 File Manager
ISG50 User’s Guide
732
The firmware update can take up to five minutes. Do not turn off or reset
the ISG50 while the firmware update is in progress!
Figure 493 Maintenance > File Manager > Firmware Package
The following table describes the labels in this screen.
After you see the Firmware Upload in Process screen, wait two minutes before logging into the
ISG50 again.
Figure 494 Firmware Upload In Process
Note: The ISG50 automatically reboots after a successful upload.
The ISG50 automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 495 Network Temporarily Disconnected
Table 292 Maintenance > File Manager > Firmware Package
LABEL DESCRIPTION
Boot
Module
This is the version of the boot module that is currently on the ISG50.
Current
Version
This is the firmware version and the date created.
Released
Date
This is the date that the version of the firmware was created.
File Path Type in the location of the file you want to upload in this field or click Browse ... to find
it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.