Chapter 47 Schedules
ISG50 User’s Guide
628
47.2.2 The Recurring Schedule Add/Edit Screen
The Recurring Schedule Add/Edit screen allows you to define a recurring schedule or edit an
existing one. To access this screen, go to the Schedule screen (see Section 47.2 on page 626), and
click either the Add icon or an Edit icon in the Recurring section.
Figure 419 Configuration > Object > Schedule > Add (Recurring)
The Year, Month, and Day columns are not used in recurring schedules and are disabled in this
screen. The following table describes the remaining labels in this screen.
StopDate Specify the year, month, and day when the schedule ends.
Year - 1900 - 2999
Month - 1 - 12
Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Hour - 0 - 23
Minute - 0 - 59
StopTime Specify the hour and minute when the schedule ends.
Hour - 0 - 23
Minute - 0 - 59
OK Click OK to save your changes back to the ISG50.
Cancel Click Cancel to exit this screen without saving your changes.
Table 247 Configuration > Object > Schedule > Add (One Time) (continued)
LABEL DESCRIPTION
Table 248 Configuration > Object > Schedule > Add (Recurring)
LABEL DESCRIPTION
Configuration
Name Type the name used to refer to the recurring schedule. You may use 1-31
alphanumeric characters, underscores(
_), or dashes (-), but the first character
cannot be a number. This value is case-sensitive.
Date Time