Chapter 52 System
ISG50 User’s Guide
683
52.7.5 Service Control Rules
Click Add or Edit in the Service Control table in a WWW, SSH, Telnet, FTP or SNMP screen to
add a service control rule.
Figure 453 Configuration > System > Service Control Rule > Edit
The following table describes the labels in this screen.
52.7.6 Customizing the WWW Login Page
Click Configuration > System > WWW > Login Page to open the Login Page screen. Use this
screen to customize the Web Configurator login screen. You can also customize the page that
Table 275 Configuration > System > Service Control Rule > Edit
LABEL DESCRIPTION
Create new
Object
Use this to configure any new settings objects that you need to use in this screen.
Address Object Select ALL to allow or deny any computer to communicate with the ISG50 using
this service.
Select a predefined address object to just allow or deny the computer with the IP
address that you specified to access the ISG50 using this service.
Zone Select ALL to allow or prevent any ISG50 zones from being accessed using this
service.
Select a predefined ISG50 zone on which a incoming service is allowed or denied.
Action Select Accept to allow the user to access the ISG50 from the specified computers.
Select Deny to block the user’s access to the ISG50 from the specified computers.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving