Filter
Top Products
Appendix A Log Descriptions
ISG50 User’s Guide
818
Interface %s connect
failed: MS-CHAP
authentication
failed.
MS-CHAP authentication failed (the server must support MS-CHAP
and verify that the authentication failed, this does not include cases
where the server does not support MS-CHAP). %s: interface name.
Interface %s connect
failed: CHAP
authentication
failed.
CHAP authentication failed (the server must support CHAP and verify
that the authentication failed, this does not include cases where the
server does not support CHAP). CHAP: interface name.
Interface %s is
connected.
A PPP interface connected successfully. %s: interface name.
Interface %s is
disconnected.
A PPP interface disconnected successfully. %s: interface name.
Interface %s connect
failed: Peer not
responding.
The interface’s connection will be terminated because the server did
not send any LCP packets. %s: interface name.
Interface %s connect
failed: PAP
authentication
failed.
PAP authentication failed (the server must support PAP and verify
verify that the authentication failed, this does not include cases
where the server does not support PAP). %s: PPP interface name.
Interface %s connect
failed: Connect
timeout.
A PPPOE connection timed out due to a lack of response from the
PPPOE server. %s: PPP interface name.
Interface %s create
failed because has no
member.
A bridge interface has no member. %s: bridge interface name.
"Interface cellular
Application Error Code
%d\n.
The listed error code (%d) was generated due to an internal cellular
interface error.
"An error [%d]
occurred while
negotiating with the
device in %s. Please
try to remove then
insert the device.
The listed error code (%d) happened when the ISG50 attempted to
negotiate with the cellular device installed in (or connected to) the
listed slot (%s). Remove and reinstall the device.
"Unable to negotiate
with the device in %s.
Please try to remove
then insert the
device.
The ISG50 could not negotiate with the cellular device installed in (or
connected to) the listed slot (%s). Remove and reinstall the device.
"Unable to configure
the selected frequency
band to the device in
%s. Please try to
remove then insert the
device.
The ISG50 failed to set the cellular device installed in (or connected
to) the listed slot (%s) to use the frequency band you configured. The
cellular device may not support the band or you may need to try
removing and reinstalling the device.
"PIN code is required
for inteface
cellular%d. Please
check the PIN code
setting.
The PIN code configured for the listed cellular interface (%d) is
incorrect or missing.
Table 332 Interface Logs (continued)
LOG MESSAGE DESCRIPTION