Chapter 27 Global PBX Settings
ISG50 User’s Guide
435
27.4 The E-Mail Screen
Use this screen to configure the mail server information through which the ISG50 sends voice mails
and CDR (Call Detail Record) files to the email addresses which you configured in extension voice
mail (see Section 29.3.3 on page 467) and CDR (see Section 54.2 on page 721) screens. Click
Configuration > PBX > Global > E-Mail to view the screen as shown next.
Figure 280 Configuration > PBX > Global > E-Mail
Each field is described in the following table.
27.5 The Fake IP Screen
Use this screen to configure settings that may help you to avoid any potential VoIP problems that
result from having your ISG50 behind a NAT router.
Note: This feature should be used if the NAT router does not utilize SIP ALG.
Table 143 Configuration > PBX > Global > E-Mail
LABEL DESCRIPTION
E-Mail Server Specify a mail server’s IP address.
Sender Specify the sender’s email address.
SMTP
Authentication
Select this and enter your username and password if user authentication is required in
the mail server.
Apply
Click this to save your changes.
Reset Click this to set every field in this screen to its last-saved value.