Filter
Top Products
Appendix A Log Descriptions
ISG50 User’s Guide
783
Unknown SIP response.
Response code: %d.
Response method: %s.
Address: %s.
The ISG50 received an unknown SIP response.
1st %d: Response code
1st %s: Response method
2nd %s: Address
Registration from
extension '%s' failed
for '%s'. Reason: %s.
The listed extension’s registration failed.
1st %s: "To" header from Request
2nd %s: Request address
3rd %s: Reason
The call can't be
configured as peer-to-
peer call. Reason: Peer
should be behind NAT.
The call could not be made as a peer to peer call because at least 1
phone is behind NAT.
The call can't be
configured as peer-to-
peer call. Reason: PBX
should behind NAT, and
peer should be in local
net.
There was a peer to peer exception. The PBX should be behind NAT
and peers should be on the local network.
The call can't be
configured as peer-to-
peer call. Reason: At
least one peer is at
different WAN/LAN.
This is due to a peer to peer exception; at least 1 phone is at a
different WAN/LAN.
The call can't be
configured as peer-to-
peer call. Reason:
Peer-to-peer local net
hasn't been set up.
This is due to a peer to peer exception. The peer to peer local net is
not set up.
The call can't be
configured as peer-to-
peer call. Reason: At
least one peer DTMF is
not INFO.
This is due to a peer to peer exception. At least 1 phone’s DTMF is
not set to INFO.
The call can't be
configured as peer-to-
peer call. Reason:
Codec is different.
This peer to peer exception is due to different codecs.
The call can't be
configured as peer-to-
peer call. Reason: Call
recording is enabled.
This peer to peer exception is due to at least 1 peer enabling call
recording .
No more available RTP
port. Please enlarge
the RTP port range
No more available RTP ports. Please enlarge the RTP port range.
Table 311 PBX SIP Logs (continued)
LOG MESSAGE DESCRIPTION