Filter
Top Products
Appendix A Log Descriptions
ISG50 User’s Guide
823
Table 335 Force Authentication Logs
LOG MESSAGE DESCRIPTION
Force User
Authentication will be
enabled due to http
server is enabled.
Force user authentication will be turned on because HTTP server was
turned on.
Force User
Authentication will be
disabled due to http
server is disabled.
Force user authentication will be turned off because HTTP server was
turned off.
Force User
Authentication may not
work properly!
Table 336 File Manager Logs
LOG MESSAGE DESCRIPTION
ERROR:#%s, %s
Apply configuration failed, this log will be what CLI command is and
what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
WARNING:#%s, %s
Apply configuration failed, this log will be what CLI command is and
what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
ERROR:#%s, %s
Run script failed, this log will be what wrong CLI command is and
what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
WARNING:#%s, %s
Run script failed, this log will be what wrong CLI command is and
what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Resetting system...
Before apply configuration file.
System resetted. Now
apply %s..
After the system reset, it started to apply the configuration file.
%s is configuration file name.
Running %s...
An administrator ran the listed shell script.
%s is script file name.
Going to rollback
previous running-
config.
Applying the configuration file failed and the ISG50 is going to roll
back to the previous running-config.