Filter
Top Products
Chapter 32 LCR
ISG50 User’s Guide
523
32.2.2 Add/Edit LCR Dial Condition
Use this screen to set up a dialing condition for an LCR. To access this screen, click the Add or Edit
icon in the Dial Condition List section of the LCR screen you are configuring to view a screen as
shown.
Outbound Line
Group
Use this section to add or remove outbound line groups from this outbound dialing rule
(LCR).
• Add an outbound line group to this LCR: Highlight an outbound line group in the Pool
column by clicking on it and then click the Right button to move it to the Selected
column.
• Remove an outbound line group from this LCR: Highlight an outbound line group in
the Selected column by clicking on it and then click the Left button to move it to the
Pool column.
If the LCR contains multiple outbound line groups, you can use the Up and Down buttons
to specify the priority of the outbound line groups.
• Highlight an outbound line group in the Selected column by clicking on it and then
click the Up button to raise its priority.
• Highlight an outbound line group in the Selected column by clicking on it and then
click the Down button to lower its priority.
Dial Condition
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify it.
Number Pattern
Test
Select a dial condition parameter entry and click Number Pattern Test to check whether
a number dialed from one of the extensions meets the criteria specified in the Dial
Condition field.
In the pop-up window, type a number in the Number Pattern Test field and click the
right arrow button. An O appears, if the number you typed matches the dial condition. An
X appears, if the number you typed does not match the dial condition.
Remove To remove one or more entries, select them and click Remove. The ISG50 confirms you
want to remove it before doing so.
Dial Condition
This field displays the dial conditions (string of digits) that are used by this outbound
dialing rule (LCR).
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.
Table 184 Configuration > PBX > Outbound Line Management > LCR > Add (continued)
LABEL DESCRIPTION