Chapter 5 Quick Setup
ISG50 User’s Guide
73
Note: Enter the Internet access information exactly as your ISP gave it to you.
Figure 49 WAN and ISP Connection Settings: (PPTP Shown)
The following table describes the labels in this screen.
Table 11 WAN and ISP Connection Settings
LABEL DESCRIPTION
ISP Parameter This section appears if the interface uses a PPPoE or PPTP Internet connection.
Encapsulation This displays the type of Internet connection you are configuring.
Authentication
Type
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - Your ISG50 accepts either CHAP or PAP when requested by this remote
node.
CHAP - Your ISG50 accepts CHAP only.
PAP - Your ISG50 accepts PAP only.
MSCHAP - Your ISG50 accepts MSCHAP only.
MSCHAP-V2 - Your ISG50 accepts MSCHAP-V2 only.
User Name Type the user name given to you by your ISP. You can use alphanumeric and -_
@$./
characters, and it can be up to 31 characters long.
Password Type the password associated with the user name above. Use up to 64 ASCII characters
except the [] and ?. This field can be blank.