Filter
Top Products
Chapter 24 IPSec VPN
ISG50 User’s Guide
380
To access this screen, click Configuration > VPN > Network > IPSec VPN > VPN Gateway.
The following screen appears.
Figure 251 Configuration > VPN > IPSec VPN > VPN Gateway
Each field is discussed in the following table. See Section 24.3.1 on page 381 for more information.
Table 125 Configuration > VPN > IPSec VPN > VPN Gateway
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can
modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The ISG50 confirms you want
to remove it before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Object References Select an entry and click Object References to open a screen that shows
which settings use the entry. See Section 12.3.2 on page 246 for an example.
# This field is a sequential value, and it is not associated with a specific VPN
gateway.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when
the entry is inactive.
Name This field displays the name of the VPN gateway
My address This field displays the interface or a domain name the ISG50 uses for the VPN
gateway.
Secure Gateway This field displays the IP address(es) of the remote IPSec routers.
VPN Connection This field displays VPN connections that use this VPN gateway.
Apply Click Apply to save your changes back to the ISG50.
Reset Click Reset to return the screen to its last-saved settings.