Chapter 32 LCR
ISG50 User’s Guide
522
Note: Only the Add LCR screen is shown. In the Edit LCR screen, some of the fields are
read-only. Before you configure any dial conditions for an LCR, you must first
configure a name for the LCR.
Figure 344 Configuration > PBX > Outbound Line Management > LCR > Add
Each field is described in the following table.
Table 184 Configuration > PBX > Outbound Line Management > LCR > Add
LABEL DESCRIPTION
LCR Settings
LCR Name Type a short name to identify this outbound dialing rule (LCR). You can use letters “a-z”,
“A-Z”, numbers “0-9” and the underscore “_” character. Spaces are not allowed. The first
character cannot be a digit.
Description
Type a short description for this outbound dialing rule (LCR). You can use printable ASCII
characters; spaces are allowed.
Max. Call Time
Leave this field blank, if you don’t want to limit the duration of outgoing calls that use this
outbound dialing rule (LCR).
Alternatively, enter the number of seconds (1-99999) to which you want to limit the
duration of outgoing calls that use this outbound dialing rule (LCR).