Filter
Top Products
3 Installing a New G700 with an S8300: Install New Software on the S8300
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
101
Install New Software on the S8300
Although this is a new installation and a version of Communication Manager already exists on the S8300,
there may be new software loads available that you need to install. If necessary, follow the steps in this
section to install the most recent version of Communication Manager.
Set the Time, Date, and Time Zone
1.
Choose Set Server Time/Time Zone and Date from the menu on the left pane of the main menu.
The S8300 displays the Set Server Time/Timezone window.
Set Server Time/Timezone Window
2. Set the media server’s time close enough to the NTS’s time, date, and time zone that
synchronization can occur (within about 5 minutes).
Once you have transferred the updated S8300 software file (with a .tar extension) to the S8300 Media
Server, the software is available to be installed.
!
CAUTION:
For a new installation, be sure to set the time and time zone before installing the S8300
software. Failure to do so may cause network problems.