Filter
Top Products
3 Installing a New G700 with an S8300: Administer Communication Manager
144
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
Add LSP names to the LSP form
1.
At the S8300 SAT prompt, type change lsp to open the LSP form.
LSP Screen
2. Enter the node name for each LSP supported by the primary controller and submit the form.
change lsp Page 1 of 16
LOCAL SURVIVABLE PROCESSOR
Number NAME IP Address Currently Translations
Available? Updated
1 node-10-LSP
_ 192.168.1.50 y 14:21 5/4/2003
2 ____________ n
3 ____________ n
4 ____________ n
5 ____________ n
6 ____________ n
7 ____________ n
8 ____________ n
9 ____________ n
10 ____________ n
11 ____________ n
12 ____________ n
13 ____________ n
14 ____________ n
15 ____________ n
16 ____________ n