7 Connecting Telephones and Adjunct Systems: Installation and Wiring Telephones and Power Supplies
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
255
Connect Telephones
Various analog, digital, and IP telephones can be connected to the Media Gateway. Typical examples of
these procedures follow:
• Typical Adjunct Power Connections
• Connect an Analog Station or 2-Wire Digital Station
Install and Wire Telephone Power Supplies
This section provides information and wiring examples of installation procedures for various telephone and
console power supplies. These are examples only and actual wiring procedures may vary at each site.
Note: Refer to the Installation for Adjuncts and Peripherals for Avaya Communication
Manager, 555-233-116, to install the necessary peripheral equipment.
The power is provided to telephones or consoles either locally or centrally.
Centrally located power supplies include
• “1152A1 Mid-Span Power Distribution Unit” on page 258
• “P333T-PWR Power over Ethernet Stackable Switch” on page 262
Local power supplies include
• “1151B1 and 1151B2 Power Supplies” on page 264
Typical Adjunct Power Connections
The 400B2 adapter is convenient for connecting local -48 VDC power to a modular plug. See “400B2
Adapter Connecting to a Modular Plug” on page 256.
Each port network can provide power for up to three attendant consoles. This source of power is preferred
for the attendant consoles because it has the same battery backup as the G700 Media Gateway.
Adjunct power can be provided locally at the telephone or console by either the 1151A1 or 1151A2 power
supply. The 1151A1 is a standard (no battery backup) power supply unit. The 1151A2 is a battery backup
version of the 1151A1. Either power supply can support one telephone with or without an adjunct. The
maximum loop range is 250 feet (76 meters). Two modular jacks are used. Power is provided on the
PHONE jack, pins 7 and 8 (- and +, respectively).Adjunct power can be provided from the equipment room
or equipment closet with the 1145B power unit.
Refer to Installing the Avaya™ S8700 Media Server with G600 Media Gateway, on the Avaya S8300 and
S8700 Media Server Library CD, 555-233-825, for detailed power supply information and installation
procedures.