Filter
Top Products
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
253
7 Connecting Telephones and
Adjunct Systems
To administer dial plans and trunks and other features, you will use Avaya™ Communication Manager, as
usual. Consult the Administrator's Guide for Avaya™ Communication Manager, 555-233-506.
In addition, you may need to install one or more of the following adjunct systems or devices:
• IA 770 INTUITY AUDIX Messaging Application
• INTUITY AUDIX LX Messaging System
• ASAI Co-Resident DEFINITY LAN Gateway (DLG)
• Call Center
• Avaya VisAbility Management Suite
• Uninterruptible Power Supply (UPS)
For these adjunct systems, consult the documentation specific to the system for complete installation
instructions.
Your planning documentation specifies the equipment you will be installing. To locate installation
instructions, use the documentation indicated below.
WARNING:
!
To reduce the risk of fire, use only 26 AWG or larger telecommunication line cords
when installing telephones or adjuncts.
WARNING:
!
Attention: Pour réduire les risques d’incendie, utiliser uniquement des conductors de
télécommmunications 26 AWG ou de section supérieure.
Installation and Wiring Telephones and Power
Supplies
The wiring procedures are the same for most Avaya telephones and other equipment.
This section provides wiring examples of similar installation procedures. These are examples only; actual
wiring procedures may vary at each site. For a complete description of wiring procedures, refer to
"Installing and Wiring Telephones" in Installing the Avaya™ S8700 Media Server with the Avaya™ MCC1
or the Avaya™ SCC1 Media Gateway. After installing the hardware, the data for the telephone features
must be administered. These procedures are provided in the Administrator’s Guide for Avaya™