Filter
Top Products
3 Installing a New G700 with an S8300: Configure the S8300
118
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
up the time clock with Set Server Time/Timezone option. You need to set the server clock
using the Set Server Time / Timezone screen. You can do this now, then return to the
Configure Server window.
- Choose
Use these Network Time Servers to enter up to three time servers. Select this option
to enable NTP and be synchronized with an external time source on the corporate network.
22. If you did not select Use these Network Time Servers in the previous step, click Continue and
go to the next step
If you selected Use these Network Time Servers in the previous step, complete the following
fields. Specify up to three network time servers by IP address or DNS name in the order in which
you want the S8300 Media Server to check them. You should always specify at least two.
Primary — Enter an IP address or DNS name. If a trusted key is required, enter a valid key
number in the
Trusted Key field.
Secondary — Enter an IP address or DNS name. If a trusted key is required, enter a valid key
number in the
Trusted Key field.
Tertiary — Enter an IP address or DNS name. If a trusted key is required, enter a valid key
number in the
Trusted Key field.
Multicast Client Support — Select Yes if the NTS routinely broadcasts its timing messages to
multiple clients. Select
No if the S8300 Media Server is to poll (directly request the time from) the
NTS.
Additional trusted keys (optional) — If you want to encrypt the messages between an NTS and
the S8300 Media Server, list the valid key numbers, up to 3, provided by your LAN administrator
on the pre installation worksheet. Trusted keys function like a checksum to make sure the time
packets are valid. Use a blank space as a delimiter if there is more than one key (for example, 2 3
6 to specify valid keys 2, 3, and 6). These numbers are associated with encryption codes in a
"keys" file.
Request key — Enter a key to send a remote query request. Only 1 key is allowed in this field.
Control key — Enter a key to query and request changes to an NTS. Only 1 key is allowed in this
field.
23. If you have a file named keys.install to allow the media server to communicate with the NTS,
select
Install keys from var/home/ftp/keys.install. If you do not have a keys.install file, select
Do not install a new keys file.
If you have a keys.install file, upload or create it now, if possible. See “Provide the keys.install
File (If Necessary)” on page 122. If you upload the keys file later, you have to run the Configure
Server wizard again to have the system recognize it.
Click Continue.
24. At the next screen, Set Modem Interface, you can set up the Modem Interface IP Address for
Avaya-provided service.