Filter
Top Products
3 Installing a New G700 with an S8300: Administer Communication Manager
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
143
Administer IP Interfaces
This procedure assigns network region 1, as an example, to the S8300 Media Server.
Assign the network region to the S8300
1.
At the SAT prompt, type change ip-interfaces.
The S8300 displays the IP Interfaces screen.
IP Interfaces Screen
2. The field Eth Port should indicate Y (yes). The Node Name should be the IP address of the
S8300 Media Server.
Administer the LSP Form
If the primary controller has LSPs, you must enter the LSP node names on the LSP form to enable the
LSPs to get translations updates from the primary controller. Once the LSPs are successfully entered
on the LSP form, their status can be viewed with the display lsp command.
Note: The LSP node names must be administered on the node-names-ip form before
they can be entered on the LSP form.
change ip-interfaces Page 1 of 6 SPE B
IP INTERFACES
Enable Net
Eth Pt Type Slot Code Sfx Node Name Subnet Mask Gateway Address Rgn
y PROC 135.122.49.55 255.255.0 .0 172.23 .23 .254 1
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .