Filter
Top Products
5 Upgrading an Existing G700 with an S8300: Configure the Server
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
229
Configure the Server
After the S8300 software upgrade is complete, you must run the complete Configure Server wizard from the
S8300 web page. Because this is part of an upgrade procedure rather than an initial installation, you should
not need to enter any information for this configuration procedure. However, you do need to do the
complete configuration procedure by clicking the Continue button on each of the configuration screens.
1. On the S8300 Web page main menu, click on Configure Server under Server Configuration and
Upgrade. The system displays the Configure Server screen.
2. Click Continue.
The system displays the Back Up Data notice.
3. Ignore the backup instruction. Click Continue.
The system displays the Select method for configuring the server screen.
4. Select "Configure all services using the wizard," and click Continue.
5. On each remaining configuration screen, click Continue until the configuration is complete.