Filter
Top Products
3 Installing a New G700 with an S8300: Configure the S8300
112
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
7. Click Continue.
The
Configure Ethernet Interfaces screen appears.
Configure Ethernet Interfaces Screen
8. Use your planning forms to complete the fields for the:
-
IP Address assigned to the S8300 Media Server. Check your planning forms.
- Gateway with the IP address of the default gateway of the subnet.
- Subnet Mask with the value of the subnet mask of the hosting subnet.
- Speed which should be set to Auto Sense.
!
CAUTION:
Do not guess on the addresses on this screen. If you enter the wrong addresses, service will
be disrupted across the customer’s network and may be difficult to correct.
9. Click Continue.
The
Configure Local Survivable Processor screen appears.