Filter
Top Products
4 Installing a New G700 without an S8300: Administer Communication Manager
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
199
Assign LSPs to the Network Regions
If the primary controller has LSPs, you can assign the LSPs to network regions. In the event of a
network failure, IP telephones assigned to a network region will register with the LSPs assigned to
that region.
This procedure assigns up to six LSPs to a network region.
Assign LSPs to a network region
1. On the IP Network Region screen, go to page 3.
IP Network Region Screen, page 3
2. Enter the names of up to six LSPs to be assigned to region 1. The LSP names must be the same as
administered on the Node Names form.
3. Submit the form.
4. Repeat for each network region to which you want to assign LSPs.
change ip-network-region 1 Page 3 of 3
IP Network Region
LSP NAMES IN PRIORITY ORDER
1 node-10-LSP______
2 ________________
3 ________________
4 ________________
5 ________________
6 ________________