Filter
Top Products
3 Installing a New G700 with an S8300: Configure the S8300
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
113
Configure Local Survivable Processor Screen
10. Select one of the following options:
- This is NOT a survivable remote processor.
- This is a local survivable processor (LSP) with an S8700 media server as the primary
controller.
- This is a local survivable processor with a S8300 media server as the primary controller.
11. If you clicked the LSP option with an S8700, complete the additional fields as follows:
CLAN IP address of the primary controller — Enter the IP address of any CLAN board in the
S8700 media server configuration.
IP address of server 1 (required) — Enter the IP address of the primary S8700 server.
IP address of server 2 (optional) — Enter the IP address of the duplicated primary S8700 server.
If server 2 is present, this specific IP address must also be entered.
IP address of secondary server 1 (optional) — Enter the IP address of the secondary S8700
server.