Filter
Top Products
4 Installing a New G700 without an S8300: Administer Communication Manager
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
195
The Primary Controller is an S8700
If the primary controller is an S8700.
This document covers only the administration of Communication Manager required for the G700 Media
Gateway to communicate with the primary controller over a customer’s network. For the majority of
required administration, see ‘‘Administrator’s Guide to Avaya™ Communication Manager, 555-233-506,’’
or ‘‘Administration for Network Connectivity for Avaya™ Communication Manager, 555-233-504.’’
In this section, you will use the SAT interface to:
• Assign Node Names
• Define the IP Network Region
• Add a Media Gateway
Note: For information on installing the CLAN boards on the S8700 port networks and
complete information on installing an S8700 Media Server, see the Installation
documentation on the ‘‘Avaya S8300 and S8700 Media Server Library CD, 555-
233-825.’’
Assign Node Names and IP Addresses for the C-LANs and LSPs
Note: The CLAN boards must be TN799DP running version 5 or greater firmware. Be
sure to check the firmware version for these boards on the S8700. For
information on how to upgrade the firmware on the S8700, please see the section
"Upgrade Firmware in Selected Port Cabinet Packs" in Upgrading the Avaya
Media Server Configuration in the S8700 documentation portion of this
documentation CD, ‘‘Avaya S8300 and S8700 Media Server Library CD, 555-
233-325.’’
Assign node names and IP addresses
1.
At the S8700 SAT prompt, type change node-names ip to open the Node Names screen.
2. Go to page 2