Filter
Top Products
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
161
4 Installing a New G700 without
an S8300
This chapter covers the procedures to install the firmware on an new Avaya
TM
G700 Media Gateway without
an Avaya
TM
S8300 Media Server. The G700 is controlled by an external primary server running Avaya
TM
Communication Manger. The primary server can be either an Avaya
TM
S8700 Media Server or an S8300
residing in another G700.
Note: Procedures to install or upgrade an S8700 Media Server are not covered in this
document. See Avaya
TM
S8300 and S8700 Media Server Library, which is on the
Avaya Support website (http://www.avaya.com/support) or on the CD, 555-233-
825.
Note: If you are using the Avaya Gateway Installation Wizard (GIW), the GIW performs
these tasks automatically:
Assign the IP Addresses of the G700 Media Gateway
Components, Set up the Controller List for the G700 Media Gateway, Check for IP
Connections, and Set the LSP Transition Points sections. However, the GIW does not
configure an X330 Expansion module. This task you must still perform as
described in this document.