Filter
Top Products
1 Roadmap and Reference: Installation Roadmap and Task Lists
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
33
Checklist 2:
Install a New G700 without an S8300
Use the following checklist to install a G700 Media Gateway with the following characteristics:
• The G700 does not have an S8300 and is controlled by an external S8300 or S8700 Me00dia Server.
You will use Chapters 2 and 4 with this checklist.
For help with connecting to and logging in to the G700, see Connection Methods
in this chapter.
Checklist 2. Install a New G700 without an S8300
Task Subtasks (If any)
“Installation Overview” on page 162
“Before Going to the Customer Site” on
page 164
- Get planning forms
- Get the G700 serial number
- Set up TFTP server, if necessary
- Download firmware files
“Installing Hardware for the G700
Media Gateway and S8300 Media
Server” on page 61
- On site checklist
- Unpack and check the order
- Install the G700
- Cable multiple units
- Attach ground conductors
“Configure the G700” on page 168 - Assign IP addresses to the G700 processors
- Set up IP routing for the stack
- Set up default IP route for the G700
- Check IP connections
- Set up controller list for the G700
- Configure X330 Expansion Module, if necessary
“Prepare to Install Firmware the G700”
on page 181
- Verify contents of the tftp directory
- Determine which firmware to install
1 of 2