Filter
Top Products
1 Roadmap and Reference: Connection and Login Methods
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
57
Note: The Device Manager is not available through the S8300 Media Server. You must
be connected to either the P330 Stack Processor or G700 Media Gateway
processor through the corporate LAN.
3. A GUI rendering of the stack devices appears. Proceed with Media Gateway or stack device
administration.
Avaya Site Administration
Avaya Site Administration is part of the Avaya VisAbility Suite Standard Plus package. Normally,
the customer can simply select Download next to the Administration item on the Media Server Home
Page to download Avaya Site Administration. The customer then follows the directions presented by
the download/installation wizard.
Configure Avaya Site Administration
When Avaya Site Administration is initially installed on a client machine, it needs to be configured to
communicate with Communication Manager on the S8300 Media Server.
When it runs initially, after downloading, you need to create a new entry for the switch connection.
To create new entries for the switch, follow the procedure “Adding an S8300 Switch Administration
Item” on page 57.
Adding an S8300 Switch Administration Item
1. Click File > New > Voice System.
The system displays the Add Voice System window.
2. Enter a name in the Voice System Name: field. As a technician configuring Avaya Site
Administration on your laptop, use a generic name, as you will be able to use this connection item
for all S8300 Media Servers.
3. Click Next. The connection type dialog box displays.
4. Click the Network connection radio button.
5. Click Next. The Network Connection dialog box displays.
6. Enter the IP address used to connect to the S8300.
7. Click Next. The Network Connection/Port Number dialog box displays.
8. TCP/IP Port Number: For the port number, ALWAYS use port 23 for the craft login. Use port
5023 for the customer login.
9. Click Next. The Network Connection/Timeout Parameters dialog box displays. Leave the default
values for the timeout parameters.
10. Click Next. The login type dialog box displays.
11. Click the “I want to login manually each time” radio button.
12. Click Next. The switch summary dialog box displays.