Filter
Top Products
5 Upgrading an Existing G700 with an S8300: On site Preparation for the Upgrade
216
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
User name. You must enter a valid user name to enable the media server to log in to the FTP
server. If you want to use the anonymous account, type "anonymous" in this field. If you do not
want to use the anonymous account, type the actual user name in this field.
Password. You must enter a password that is valid for the user name you entered. If you are
using anonymous as the user name, you must use your email address as the password. However,
the FTP site may have a different convention.
Host name. Enter the DNS name or IP address of the FTP server to which the backup data is
sent. To enter an IP address, use the dotted decimal notation (for example, 192.11.13.6).
Directory. Enter the directory on the corporate repository to which you want to copy the
backup file. When you enter a forward slash (/) in the directory field, the system copies the
backup file to the default directory. The default directory for backup data on the FTP server is
/var/home/ftp. If you do not want to use the default directory, you must enter the path name for the
directory.
6. Click Start Backup.
The system displays the results of your backup procedure on the Backup Now results screen.
Check Link Status
1. At the SAT prompt, type display communication-interface links and press Enter.
2. Note all administered links.
3. Type status link number and press Enter for each administered link.
4. Check the following fields for the values listed:
- Link Status = connected
- Service State = in service
5. Type list signaling group and press Enter.
6. Note the signaling groups listed by number.
7. For each of the signaling groups listed, type status signaling group <number> and
press
Enter.
8. If any of the links are not up, make note of any that are down.
Record All Busyouts
1. At the SAT prompt, type display errors and press Enter. Look for type 18 errors and record any
trunks that are busied out, so you can return them to their busy-out state after the upgrade.
Disable TTI
Note: Do this step only if Terminal Translation Initialization (TTI) is enabled.
!
CAUTION:
If you do not disable the TTI, the translations can be corrupted.
1. At the SAT prompt, type change system-parameters features and press Enter.