IP Helper/DHCP Relay Commands 1053
--------------- ----------- -------- ---------- ---------------
vlan 100 dhcp No 10 10.100.1.254
10.100.2.254
vlan 101 any Yes 2
any dhcp No 0 10.200.1.254
show ip dhcp relay
Use the show ip dhcp relay command in User EXEC mode to display the
BootP/DHCP Relay information.
Syntax
show ip dhcp relay
Parameter Description
This command has no arguments or keywords.
Default Configuration
The command has no default configuration.
Command Mode
User EXEC and Privileged EXEC modes, Config mode and all Config sub-
modes
User Guidelines
This command has no user guidelines.
Example
The following example defines the Boot/DHCP Relay information.
console#show ip dhcp relay
Maximum Hop Count.............................. 4
Minimum Wait Time(Seconds)..................... 0
2CSPC4.X8100-SWUM102.book Page 1053 Friday, March 15, 2013 8:56 AM