576 LLDP Commands
Syntax
lldp timers [interval transmit-interval] [hold hold-multiplier] [reinit reinit-
delay]
no lldp timers [interval] [hold] [reinit]
•
transmit-interval —
The interval in seconds at which to transmit local data
LLDPDUs. (Range: 5–32768 seconds)
•
hold-multiplier —
Multiplier on the transmit interval used to set the TTL
in local data LLDPDUs. (Range: 2–10)
•
reinit-delay —
The delay in seconds before re-initialization. (Range: 1–10
seconds)
Default Configuration
The default transmit interval is 30 seconds.
The default hold-multiplier is 4.
The default delay before re-initialization is 2 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Examples
The following example displays how to configure LLDP to transmit local
information every 1000 seconds.
console(config)#lldp timers interval 1000
The following example displays how to set the timing parameter at 1000
seconds with a hold multiplier of 8 and a 5 second delay before re-
initialization.
console(config)#lldp timers interval 1000 hold 8
reinit 5
2CSPC4.X8100-SWUM102.book Page 576 Friday, March 15, 2013 8:56 AM