Filter
Top Products
Command Groups 133
ipv6 pim register-rate-limit
Sets a limit on the maximum number of PIM
register messages sent per second for each (S,G)
entry
GC
ipv6 pim register-threshold
Configures the Register Threshold rate for the
RP router to switch to the shortest path.
GC
ipv6 pim rp-address
Statically configures the Rendezvous Point (RP)
address for one or more multicast groups.
GC
ipv6 pim rp-candidate
Configures the router to advertise itself as a
PIM candidate rendezvous point (RP) to the
bootstrap router (BSR).
GC
ipv6 pim sparse (Global
config)
Administratively configures PIM sparse mode
for multicast routing.
GC
ipv6 pim spt-threshold
Configures the Data Threshold rate for the last-
hop router to switch to the shortest path.
GC
ipv6 pim ssm
Defines the Source Specific Multicast (SSM)
range of multicast addresses.
GC
show ipv6 pim
Displays global status of IPv6 PIMSM and its
IPv6 routing interfaces.
PE or
GC
show ipv6 pim bsr
Displays the bootstrap router (BSR)
information.
PE or
GC
show ipv6 pim bsr-router
Display the bootstrap router (BSR)
information.
UE,
PE, or
GC
show ipv6 pim interface
Displays interface config parameters. PE or
GC
show ipv6 pim neighbor
Displays IPv6 PIMSM neighbors learned on the
routing interfaces.
PE or
GC
show ipv6 pim rphash
Displays which rendezvous point (RP) is being
selected for a specified group.
PE or
GC
show ipv6 pim rp mapping
Displays all group-to-RP mappings of which the
router is aware (either configured or learned
from the bootstrap router (BSR).
PE or
GC
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 133 Friday, March 15, 2013 8:56 AM