Filter
Top Products
Command Groups 79
Radius
Configures and displays RADIUS information.
Spanning Tree
Configures and reports on Spanning Tree protocol.
TACACS+
Configures and displays TACACS+ information.
VLAN
Configures VLANs and displays VLAN information.
802.1x
Configures and displays commands related to 802.1x
security protocol.
Data Center Technology Commands
Data Center Bridging
Commands
Data Center Bridging Exchange Protocol (DCBX) is used
by DCB devices to exchange configuration information
with directly connected peers. The protocol is also used to
detect misconfiguration of the peer DCB devices and,
optionally, for configuration of peer DCB devices.
FIP Snooping Commands
FCoE Initialization Protocol (FIP) is used to perform the
functions of FC_BB_E device discovery, initialization and
maintenance. FIP snooping is a frame inspection method
used by FIP Snooping Bridges to monitor FIP frames and
apply policies based upon the L2 header information in
those frames, following recommendations in Annex C of
FC_BB_5 Rev 2.00
Priority Flow Control
Commands
Provides priority-based flow control that can pause
(inhibit transmission of) individual priorities within a
single physical link.
Layer 3 Commands
ARP (IPv4)
Manages Address Resolution Protocol functions.
DHCP Server and Relay
Agent (IPv4)
Manages DHCP/BOOTP operations on the system.
DHCPv6
Configures IPv6 DHCP functions.
DVMRP
(Mcast) Configures DVMRP operations.
IGMP
(Mcast) Configures IGMP operations.
IGMP Proxy
(Mcast) Manages IGMP Proxy on the system.
IP Helper/DHCP Relay
Configures relay of UDP packets.
Table 1-1. System Command Groups
(continued)
Command Group Description
2CSPC4.X8100-SWUM102.book Page 79 Friday, March 15, 2013 8:56 AM