1182 IPv6 Multicast Commands
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pim register-rate-limit 10
ipv6 pim register-threshold
Use the ipv6 pim register-threshold command to configure the Register
Threshold rate for the RP router to switch to the shortest path. Use the "no"
form of this command to set the register threshold rate to the default.
Syntax
ipv6 pim register-threshold
threshold
no ipv6 pim register-threshold
• threshold—The threshold rate (Range: 0–2000 Kbps).
Default Configuration
The default threshold rate is 0.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pim register-threshold 250
2CSPC4.X8100-SWUM102.book Page 1182 Friday, March 15, 2013 8:56 AM