Filter
Top Products
916 FIP Snooping Commands
ENodes Number of ENodes discovered.
Sessions Total virtual sessions in FCoE VLAN.
FCF Information
Interface Interface on which the FCF is discovered.
MAC MAC address of the FCF.
ENodes Total number of ENodes that are connected to the FCF.
Sessions Total number of virtual sessions accepted by FCF in the
associated VLAN.
ENode Information
Interface Interface to which the ENode is connected.
MAC MAC address of the ENode.
Sessions Total number of virtual sessions originated from ENodes to
FCF in the VLAN.
Waiting Total number of virtual connections waiting for FCF
acceptance in the VLAN.
Session Information
FCoE-MAC Source MAC address of the FCoE packets that are originated
by the ENode as part of the session.
Request (FP, SP) FIP session request type sent by ENode. This can be FLOGI or
FDESC (NPIV FDISC). Whereas FP and SP values are the FP
bit and the SP bit values in the FLOGI or NPIV FDISC request
respectively.
Expiry Time This is virtual connection/session expiry interval. This is used to
monitor the status of the session. Session entry is removed
when the value reaches 0. This value is reset to 450 secs (5*90
secs) every time an associated VN_Port FKA is received from
the ENode. This is ignored (marked as NA) if the D-bit is set to
one in the FCF Discovery Advertisements.
Mode This is the addressing mode in use by the VN_Port at ENode. In
other words, this is the type of MAC address granted (selected
and returned) by FCF. This can be one of the addressing
modes, i.e. FPMA or SPMA.
Parameter Description
2CSPC4.X8100-SWUM102.book Page 916 Friday, March 15, 2013 8:56 AM