Auto-VoIP Commands 323
switchport voice detect auto
The switchport voice detect auto command is used to enable the VoIP Profile
on all the interfaces of the switch (global configuration mode) or for a specific
interface (interface configuration mode).Use the no form of the command to
disable the VoIP Profile.
Syntax
switchport voice detect auto
no switchport voice detect auto
Default Configuration
This feature is disabled by default.
Command Mode
Global Configuration mode, Config mode and all Config sub-modes,
Interface (gigabitethernet, port-channel, tengigabitethernet,
fortygigabitethernet) Configuration mode
User Guidelines
This command has no user guidelines
Example
console(config)#interface tengigabitethernet 1/0/1
console(config-if-Te1/0/1)#switchport voice detect auto
2CSPC4.X8100-SWUM102.book Page 323 Friday, March 15, 2013 8:56 AM