Command Groups 109
radius-server deadtime
Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
GC
radius-server host
Specifies a RADIUS server host. GC
radius-server key
Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
GC
radius-server retransmit
Specifies the number of times the software
searches the list of RADIUS server hosts.
GC
radius-server source-ip
Specifies the source IP address used for
communication with RADIUS servers.
GC
radius-server timeout
Sets the interval for which a switch waits for a
server host to reply.
GC
retransmit
Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
R
show aaa servers
Displays the list of configured RADIUS servers
and the values configured for the global
parameters of the RADIUS client.
UE or
PE
show accounting methods
Displays the configured accounting method
lists.
PE
show radius statistics
Shows the statistics for an authentication or
accounting server.
UE or
PE
source-ip
Specifies the source IP address to be used for
communication with RADIUS servers.
R
timeout
Sets the timeout value in seconds for the
designated radius server.
R
usage
Specifies the usage type of the server. R
a. For the meaning of each Mode abbreviation, see
Mode Types
on page 81.
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 109 Friday, March 15, 2013 8:56 AM